Small Poles

If you have thin skipoles (often the carbon skipoles) you need to install the supplied inserts into CLIPSTIC. This way your skipoles will fit securely in the clip.

Do this by:

  • Placing both inserts into CLIPSTIC with the opening on the same side as the clip has.
  • Fasten the 4 countersunk screws to secure the inserts to CLIPSTIC only with the force of your hand. Use a PH0 screwdriver. Do not use electric screwdrivers here because this will damage the threads.
  • You're done and ready to use CLIPSTIC with your thin poles!

CLIPSTIC before installing small pole inserts



CLIPSTIC after installation of small pole inserts

After! Ready to use


Click here to go back to the quick start guide